HTCA-6600

High Availability Chassis 6U Telecom Network Appliance with 6 x86 CPU Blades and 6 I/O Blades

Key Features

  • High availability, full redundancy and extreme high performance
  • 6 CPU blades in the rear, per blade supports up to 2 Intel® Xeon® E5-2600 v3/v4 CPUs and 16x DDR4
  • BCM StrataXGS™ Trident-II/II+ BCM56854/56860 Switch Fabric with 720/1280 Gbps
  • 6 x Swappable I/O blades on the front, supporting up to 2x Switch blades or 6x Ethernet blades
  • NEBS compliant design
  • Redundant power supply and removable fan module

HTCA-6600 Overview

HTCA-6600 is designed in 6U, with six CPU blades and a combination of six Ethernet NI/switch blade slots. While sharing the same CPU and memory configurations as HTCA-6200, two Intel® Xeon® E5-2600 v3/v4 CPUs and sixteen DDR4 R-DIMM sockets for each blade as stated above, HTCA-6600 comes with six front-cabling, swappable Ethernet NI/switch blades. The top 2 blade slots are reserved for switch or Ethernet NI blades, while the other four slots are solely used for Ethernet NI blades. The Ethernet NI blade comes with the same configuration as HTCA-6200, which delivers thirty-two 10GbE ports. As the higher-end model, HTCA-6600 is designed with switch blade and CPU blade redundancy. In case one of the blades is encountered with failure, the other will take all the work loads.

HTCA-6600 Specifications

Platform
CPU Intel® Xeon® processor E5-2600 v3/v4 Series
Chipset Intel C612 Chipset
BIOS AMI SPI Flash BIOS
Memory Technology Quad-channel DDR4 2400MHz (Registered)
Memory Capacity 512GB (Registered) per M/B tray
Memory Socket Up to 16 x 288-pin DIMM per M/B tray
Storage
SATA storage 6 x 3.5” swappable drive bays,
I/O
Ethernet controller XL710
Default LAN Up to 32 x SFP+
Console 1 x RJ45
USB 2.0 1 x Type A
IPMI via OPMA slot OPMA socket to support IPMI (IAC-AST2300)
Power and Mechanical
Power input AC 85~264V DC -36~-72V
Type/Watt AC 1200 watt N+1 Redundant /each DC 1010 watt N+1 Redundant /each PM bus support, up to 5 PSU slots
Processor cooling CPU heatsinks with fan duct
System cooling 5 x hot-swappable cooling fan sets with smart fan control for each computing blade
OS and Certifications
Operating System Linux Cent OS 7.2 or above
Certifications CE Class A, FCC Class A
Physical and Environmental
Storage temperature -20°C to 70°C
Operating temperature 0°C to 40°C
Operating humidity 5% to 90% (non-condensing)
Dimensions (W x H x D) 438 mm x 265.9 mm x 685.8 mm (17.24" x 10.47" x 27.00")
Weight 55 kg (121 lbs)
Watchdog Yes
Internal RTC Yes